How to Install a Ghost Immobiliser
A ghost immobiliser is an effective deterrent to car thieves. Combining conversational tone with other security devices and remaining vigilant can help you create a strong defense against modern, tech skilled thieves.
Ghost immobilisers will shield your car from hotwiring and relay car thefts by having you enter an identification number to start the car. It is activated by buttons on your steering wheel and centre console, making it invisible to thieves.
Identifying the Wires
With more and more vehicles being taken away without the owner's key, it's vital to safeguard your vehicle. A ghost immobiliser is an excellent method to add a layer of protection for your vehicle. It blocks all signals coming from your key fob to ensure that it's impossible to start the vehicle without entering a pin.
You can install the ghost immobiliser on your own, but it is recommended to hire a professional to do the work. A professional with experience will know the best place to install the unit, and also how to properly connect it to the vehicle's wiring. Installation can be complicated and it's crucial that the connections are made properly to avoid damage or malfunctions.
Wearing safety equipment and working in a space that is well-lit will help you achieve the most effective results. Also, you should go through the user's manual to familiarise yourself the wiring system. This will assist you in identifying the wires required for installation and make sure that you have the correct equipment and components to complete the job properly.
Once the wiring is connected, you are able to reconnect your battery and see if the system is working correctly. To prevent electrical problems be sure that the battery terminals have been secured. Also, mark the CAN H and CAN L wires with labels or tape to keep the track of them during the installation process.
If you want to allow another person to drive your vehicle for a short period of time for valet parking or when the vehicle is in for a service or repair, the Ghost Immobiliser can be turned on in Transport Mode. You can enter the code by pressing an option on the steering column, centre console or door panels. Then, the Ghost Immobiliser will go into PIN code changing mode.
Some thieves try to bypass ghost immobilisers by using jamming or spoofing devices that block or send fake messages to the system. This can be avoided by investing in the latest anti-jamming technologies and monitoring your Ghost Immobiliser for indications of altering the system.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security tool created to stop theft of cars. It utilizes cutting-edge technology to monitor and deactivate the engine when the correct PIN code is entered, thereby stopping the vehicle from being driven away by thieves. The system is highly effective and stealthy, as it does not have visible indicators to stop criminals. You may need to remove your device to perform maintenance, upgrades, or even when you sell your vehicle.
This procedure requires special tools and knowledge as you'll be working with wires, and removing certain factory components. It is important to follow the step by step instructions that are provided by the manufacturer. It is recommended to seek out an experienced mechanic or auto electrician, particularly if you're not familiar with working on cars.
After identifying the wires and disconnection, it is important to verify the condition of your battery. Verify that the battery is clean, free of corrosion and that all connections are secure. If necessary, think about replacing the battery to ensure that it is strong enough to handle the electrical demands of a security system that is aftermarket.
After you have disconnected the wires, you can remove the ghost immobiliser. Strippers or wire cutters are a good way to disconnect the wires. Be careful not to cause damage to them or their terminals. Make sure you label each wire so that you can reconnect them correctly in the future. If the wires are joined and you want to use a heat resistant tool to break the connection. To avoid short-circuiting, is important to wrap the wires in insulation tape or heat shrink tubing.
Reconnect the wires with the 12V constant power source. Use Ghost 2 immobiliser to secure the connections using fuse. Connect the grounding wire using a solid grounding on the chassis of your vehicle.
After you have connected the wires, turn off your vehicle and enter your PIN. Then, restart the engine. If it doesn't start the ghost immobiliser has been successfully removed.
Making Connections
A ghost immobiliser is an affordable method to increase the safety and security of your vehicle. It connects to the CAN bus system inside your vehicle, capturing signals, and stopping the vehicle from starting until the proper PIN code has been entered. It is nearly impossible to disable. It's a great choice for those who want peace of mind and security. It can lower your insurance premiums when combined with the Thatcham Approved Tracking System.
It is essential to obtain and read the wiring diagram for the vehicle model before you begin the installation. The diagram can serve as a reference guide for locating the wires needed to create precise connections. Utilizing the right connections or soldering techniques will ensure that the connection is long-lasting and secure.
The wires that connect the Ghost immobiliser to the CAN bus system have to be properly identified and connected. Use small labels or tape to mark the CAN L and H wires. This will avoid confusion during installation. The position of these wires will differ on every vehicle, so it is crucial to check the wiring diagram of your vehicle and online resources when identifying them.
After the correct wires are connected, the power to the Ghost immobiliser can be restored. It is a good idea to test your immobiliser. Start your engine and do not enter the code. This will ensure that the immobiliser has been installed correctly and functions as intended. It is important to test your immobiliser regularly. This will allow you to identify any problems or issues early.
Another benefit of the ghost immobiliser is that it can be installed within a matter of minutes and does not require any cutting or modifications to the internal wiring of your vehicle. It is also an excellent option for those looking to increase the security of their vehicles, since it can be used in conjunction with a certified alarm or tracker, which will send a notification to your tablet or phone when the vehicle is being altered.
Mounting the Unit
The Ghost immobiliser is a great protection against car thieves, particularly when it is paired with the GPS tracking system. The device uses buttons on the centre console, doors, and steering wheel to create a unique sequence you are able to recognize. This prevents your car from beginning. The unit is also weatherproof and tamper-proof. It also comes with a three-year warranty and is recommended by a range of insurance companies.
During the process of installation it is important to follow the instructions carefully. While some people can handle the job by themselves, it's recommended to seek out a professional you have any doubts. Wire strippers and multimeters are essential tools to locate the wiring and make precise connections. It's also an excellent idea to buy some insulation and electrical tape for protecting the connections from damage. It's a good idea to test your device after the installation is complete to be sure that everything works as it should.
Ghost immobilisers are a great way to secure your vehicle, especially in areas that have high rates of crime. It stops key cloning, ECU swapping and other security risks, and can be linked to an iPhone app for easy management and monitoring. It's a popular option for car owners who want to safeguard their investment, and is easy to install.
The Ghost II immobiliser features a sleek design and a low-profile that makes it unnoticeable to thieves. It is connected to your vehicle's CAN (Controller Area Network) and blocks you from starting the engine without entering a PIN. The PIN code is generated by pressing a series of buttons on your steering wheel or console, or even your door. It can also be changed at any time. The device is also tamperproof and comes with a GPS tracker that can assist police find your car in the event of a theft. It's an excellent option to safeguard your vehicle from thieves and is Thatcham certified.