Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discrete, does not use LED indicators or key fobs and is hidden in the wiring of your vehicle.
The user may also turn off the system for a short period of time by using Transport Mode when renting their vehicle. This guide will guide you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning and relay attacks. The system connects directly to your vehicle's ECU and is protected by a unique pin code that you can choose. It is undetectable by thieves using diagnostic scanners or other modern methods. It cannot be disabled with circuit cuts.
The system is simple to use, but it's important to have an expert installation to ensure a secure and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid accidental airbag deployment or short circuits. After this is completed the installer is now able to begin work. Basic hand tools are helpful for securing connections with precision and a multimeter can be used to check the electrical properties and safety. Cable tie and insulation tape are vital to secure connections and keep wiring tidy. In addition, the user's manual provides specific guidance specifically tailored to your Ghost Immobiliser model.
During the installation, it is crucial to select a grounding point that's free of paint and debris. The installer should ensure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on your vehicle's ECU. These wires can be plugged in or soldered depending on the model. To ensure a reliable and long-lasting connection it is recommended that you choose a top-quality plug.
Transport Mode can be activated by the client after the installation is completed. This allows valet parking or mechanics to access the vehicle without having to know the pin code. The customer must press the service icon on the dashboard five times over 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's an excellent choice for those who rent their vehicles regularly on platforms such as Turo. Having an immobiliser can also reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser in order to guard your vehicle from theft. It will stop your car from being started the theft or copies the key. It's possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
ghost immobiliser cost connects to the CAN bus network in your vehicle which allows it to communicate with the ECU directly. It uses existing buttons on the dashboard and wheel to create a unique sequence only you can identify which makes it impossible for others to start your car. This is the most secure way to protect your pride and joy. It will ensure that your car's value remains intact in the event that you decide to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical issues and system malfunctions. You must first find a 12V power source and a suitable grounding for the car's chassis. After conversational tone , you are able to begin to connect the wires for the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a secure connection. Also, ensure that you cover the connections by using heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
Once the wires have been connected, you can plug in the battery and start the engine to test if the immobiliser is working. Once you have verified that everything is working correctly, you can install the immobiliser in a safe place inside the vehicle. Be sure to cover it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it meets the highest standards of security and is a fantastic protection against car thieves. It is resistant to hacking and key cloning and is not able to be disabled without the code. The device is easy to use, and it can be set up to an option for a service valet so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to stop theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your vehicle. The Ghost Immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. This is because the system doesn't send and receive radio frequency signals, and it relies on the CAN data format to communicate with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You can now begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking and will also protect the value of your most prized possession. If you ever need to surrender your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need find a source of constant power (12V) and an earthing point. Ensure that these are both well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by potential thieves. Be sure to check the exact location of these points to avoid mistakes and mark them with a piece of tape or label. Verify all connections for signs they are wearing out. Loose connections can lead to system malfunctions, so be certain that they are securely fixed and well-insulated. Don't forget to test the Ghost Immobiliser after installation is complete. This will ensure that the unit is operating properly and that all connections and insulation are safe. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to prevent unauthorised motor starting. Its cutting-edge technology protects your vehicle against key cloning and hacking and other methods commonly employed by thieves to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to provide the ultimate vehicle protection. The Ghost's unique features, coupled with its secluded design, make it a popular option for both drivers who love cars and security-conscious drivers.
To ensure the proper integration of the Ghost Immobiliser, it's important to follow the steps of the installation procedure. Consult the wiring diagram for the vehicle as it will help you locate and connect the wires. The next step is to determine the grounding and power sources. Once you have located them, you will need to mark the points so that they are easy to locate when installing. In addition, it is vital to use only the best tools and materials. Hand tools are essential to aid in making precise connections. A multimeter can verify electrical values, and ensure security. Cable ties and insulation tape will keep the connections neat and tidy. A Ghost-specific user's guide is also available.
It is essential to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser works as intended and prevent unauthorised vehicle starts. It is recommended that you perform this routinely as part of your regular vehicle inspections to ensure that the system is operating correctly.
Once the installation is complete Once the installation is complete, you can drive your vehicle with confidence. The Ghost will protect your car from would-be car thieves. It will ensure that no one is able to take your car away without having the correct PIN code. The Ghost can also be linked with a Thatcham-approved tracker to identify any attempts to steal or tamper that could lead to the location of your vehicle in the event of it being stolen.
The Ghost is compatible with a wide variety of vehicles, including those made by all major manufacturers. If you are looking to secure your vehicle with this innovative device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which guarantees we follow strict standards for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are done safely and in a safe manner.